Note: If you reecive all your channels through a cable box (Hookups E, F, or G) set up the cable box, in addition

to the following setup: Please refer to page 26 "CABLE BOX SETUP" in "FIRST TIME SETUP" section.

•VCR Plus+ setup - Channel setup

The following shows the procedure you should perform when you are receiving the Cable News Network (channel 42 with the VCR Plus+ system) on channel 38.

Matching Broadcast CH Numbers to VCR Plus+ Channels 1 Turn on the TV and select the Video channel (3 or 4).

Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.

2 Press the GUIDE button.

The main on-screen menu will appear on the TV screen.

Remote Control Illustration.

3 Press the (4) button to select CHANNEL PRESET.

4 Press the (4) button to select VCR PLUS+ SETUP.

A small arrow points to a blank "--" in the CHANNEL column.

Note: If your broadcast channel number is the same as the VCR Plus+ Channel in your TV listing do not enter any number.

5Press the CH (/) button to move up and down through the channel list until you reach VCR Plus+ CH42.

52