OPERATING CONTROLS AND FUNCTIONS

13. REC(ORD) button- Press to begin manual recording.

IRT button- Press to activate Instant Recording Timer. (only on the VCR)

14.VOLUME buttons- Press to adjust the desired TV's volume level by using either or button.

15.MODE SELECT buttons

·CATV button- For details, see page 36.

·TV button- For details, see page 36.

·VCR button- For details, see pages 36.

16.NUMBER buttons- Press to select desired channels for viewing or recording. To select channels from 1 to 9, first press "0" button then 1 to 9.

100/ENT button- When selecting cable channels which are more than 100, press this button first, then press the last two digits. (To select channel 125, first press "100/ENT" button then press "2" and "5").

17.MENU button- Press to display the menus on the TV screen. Press to exit the menus on the TV screen. (only on the remote control)

18.DISPLAY button- Press to display the counter or the current channel number and the current time on the TV screen. (only on the remote control)

19.SLOW button- Press to reduce the playback speed. Slow speed can be controlled by pressing the F.FWD button (faster) or the REW button (slower).

20.MUTE button- Press to mute the TV's sound. Press it again to resume the sound.

21.COUNTER MEMORY button- Press to set counter memory on and off.

22.COUNTER RESET button- Press to reset counter to 0:00:00.

Press to ad or delete channel numbers during channel preset.

23.VCR PLUS+ button - Press to program the automatic timer recording using the VCR Plus+ system.

24.Cable box transmitters - Send signals to cable converter box.

25.Power cord- Connect to a standard AC outlet (120V/60Hz).

26.AUDIO OUT jack- Connect to the audio input jack of your audio equipment or another VCR.

27.AUDIO IN jack- Connect to the audio output jack of your audio equipment or another VCR.

28.ANT. IN terminal- Connect to an antenna, Cable system or Satellite system.

29.VIDEO OUT jack- Connect to the video input jack of your video camera or another VCR.

30.VIDEO IN jack- Connect to the video output jack of your video camera or another VCR.

31.CH3/CH4 selector switch- Use to select a video output channel (3 or 4) for playback from your VCR.

32.ANT. OUT terminal- Connects to the antenna input terminal on your TV.

12