ANTENNA/CABLE CONNECTIONS

channel while viewing another. Scrambled channels can not be recorded with this connection.

RECORDING HINT

1)VCR power and the "VCR" indicator must be on.

2)Turn on the TV and Box.

3)Set the channel to be recorded on the VCR.

4)Set the TV and Box to channel 3 or 4.

5)Set the CH3/CH4 switch on the back of the VCR to match the channel set on the TV.

6)To view ONE channel while recording ANOTHER the "VCR" indicator must be off.

7)Or for AUTOMATIC TIMER RECORDING the "VCR" indicator must be off after step [11] on page 25.

8)Set the channel to be viewed on the Box.

Note: If you wish to see the VCR menu, view what you are recording or playing a tape with this connection, the "VCR" indicator must be on and the Box channel must match the channel selected on the back of the VCR. (CH 3 or 4)

Note to CATV system installer

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

24