CHANNEL SET UP (Automatic)
CHANNEL SET UP (Automatic)
1 Plug in the VCR power cord
Plug the VCR power cord into a standard AC outlet. The "-
Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, you DO NOT have to set up the channels. Just select the TV and VCR to channel 3 or 4 and also have the CH3/CH4 switch on the back of the VCR to match the channel you selected (CH 3 or CH 4). Now select the Box to the channel you wish to view or record.
2 Select channel 3 or 4 on the TV
Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV.
3 Turn on the VCR
Press the POWER button to turn on the VCR. Both the "PWR." indicator and the "VCR" indicator on the VCR come on.
• Use the remote control for this procedure.
4 Select 'ENGLISH" or "ESPANOL"
Select "ENGLISH" or "ESPANOL"=Spanish by using the PLAY/
or STOP/
button. Then, press the MENU or F.FWD/
button.
NOTE: This WILL NOT change the audio (sound) coming out of the VCR only the screen menu.
5 Begin Channel preset
Press the MENU, F.FWD/
or REW/
button once. The tuner scans and memorizes all active channels in your area.
• The VCR distinguishes between standard TV channels and cable channels.
6 After scanning
The tuner stops on the lowest memorized channel. The TV screen returns to TV mode.
•If "TUNER SET UP'. appears on the TV screen again, check the cable connections. Press the MENU, F.FWD/
or REW/
button once again and the VCR will begin preset again.
TO SELECT A DESIRED CHANNEL
You can select the desired channel by using the CHANNEL(CH) 
or 
button or directly pressing the number buttons on the remote control.
Note for using the number buttons:
•When selecting cable channels which are higher than 99, press the + 100 button first, then press the last two digits. (Example: to select channel 125, first press the +100 button then press "2" and "5").
•You must precede
30