AUTOMATIC TIMER RECORDING

AUTOMATIC TIMER RECORDING

You may set the VCR to start and end a recording while you are away. You can set seven programs to record on specific days, daily or weekly within a 1 year period.

In the example below, the timer is being set to record:

DATE: May 6th, 1998

SETTING TIME: from 7:30PM to 8:30PM

CHANNEL: CH16

TAPE SPEED: SP

PROGRAM NO: No. 1

·Please refer to the connection you are using, through pages 10, 11, or 12 on "ANTENNA/CABLE CONNECTIONS" before continuing.

·Use the remote control for this procedure.

·The "PWR." and the "VCR" indicator must appear on the VCR's digital display to program it.

·Turn on the TV and set the TV to channel 3 or 4. Now set the CH3/CH4 switch on the back of the VCR to match the channel selected on the TV.

·Clock must be set to the correct time and date before setting the timer.

·Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

Avoid overlap of programs ...

There is a case that a program will not be performed.

When programs overlap:

·The program with an earlier start time has priority.

·Once the earlier program finishes, the overlapping programs will begin recording in sequence.

·The illustration below demonstrates the sequence of recordings.

1 Select "TIMER PROGRAMMING"

Press the MENU button so that TIMER PROGRAMMING menu appears.

NOTE: If you have not yet set the clock, "SETTING CLOCK" appears. If so, follow the steps [2] to [8] on page 15. Then, set the timer recording.

2Select your desired program number (1-7)Program number which is not set up flashes.

Press the PLAY/ or STOP/ button until your desired program number appears. (Example: 1)

Then, press the F.FWD/ button.

57