5.Press number buttons 1, 2, or 3 to select ONE TIME, DAILY, or WEEKLY RECORDING.

Important: Programming does not take effect unless you select one of these options.

6.When the next screen comes up, choose between standard or extended tape speed by pressing the 5 button. This is also a good time to check the channel number - it should be the one on which you usually watch the program at home. (If not, you need to check your VCR Plus+ channel setup.)

7.Review the screen to be sure everything is set as you want, then press VCR PLUS+ to complete your programming or continue with additional programs.

When you have set up all the timed recordings you want:

￿ Don't forget to load a videocassette (with the safety tab still attached) to record on. ￿ If using a cable box the VCR can control, turn on the cable box before the time the recording is to begin.

￿ If using a cable box the VCR cannot control, turn on the cable box and tune it to the channel you want to record before the time the recording is to begin.

Important: Your timed recording settings take effect when you turn off the power on the VCR.

Caution on VCR Plus+ Recording

After entering a VCR Plus+ number, check the information displayed with the "PROGRAM REVIEW", if there is (are) any unnecessary program(s), please cancel. (page 43)