Hobart 120/60/1 specifications The Edge Slicer, Specifications

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

THE EDGE™ SLICER

SPECIFICATIONS

KNIFE MOTOR: 1⁄3 H.P., permanently lubricated ball bearings. Single phase capacitor-start, induction run. 3.5 AMP

GAUGE PLATE INTERLOCK: Gauge plate interlock protects knife edge when indicator is closed.

CARRIAGE SYSTEM INTERLOCK: Carriage will not remove if gauge plate not closed.

REMOVABLE CARRIAGE SYSTEM: Positive angle carriage design enables operator to slice without manual feed. The anodized aluminum carriage system is removable for thorough cleaning and sanitation procedures. The carriage has 93⁄4" manual travel.

CONTOURED CARBON STEEL KNIFE: Carbon steel, 113⁄4" diameter with sanitary hub. Knife is protected by a permanently mounted ring guard. The anodized aluminum knife cover provides easy access for cleaning. Gauge plate protects knife edge when indicator is closed.

TOP MOUNTED BORAZON STONE SHARPENER: One lever operation utilizing two Borazon stones to sharpen and hone in five seconds. Removable and top mounted. When sharpener is removed for cleaning, knife edge is shielded.

POLY V-BELT DRIVE SYSTEM: Knife is driven by a Poly V belt and runs at 370 rpm for optimal performance. Aluminum knife shaft pulley and steel motor pulley.

SANITARY ANODIZED ALUMINUM BASE: One-piece base protects against possible growth of bacteria. All surfaces are durable and smooth, presenting no holes or crevices in which food can lodge. Easy clean-up and durable finish to withstand harsh cleaning products.

PERMANENTLY MOUNTED RING GUARD: Permanently mounted ring guard with integrated product deflector protects knife during operation and cleaning.

CLEANING LEG: Cleaning leg supports the slicer in tilted position for cleaning beneath the machine.

REMOVABLE REAR DEFLECTOR: No tools are required for removal of the deflector for thorough cleaning of the slicer.

FINISH: Anodized aluminum carriage, gauge plate, knife cover and base.

MEAT GRIP: Rear mounted grip is anodized aluminum. Swings out of way when not in use.

ELECTRICAL SPECIFICATIONS: 120/60/1 –

UL Listed.

SWITCH: Moisture protected toggle type.

CORD & PLUG: 6-foot, three-wire power supply cord and plug.

CAPACITY: The carriage will take food up to 71⁄4" in width or 73⁄4" in diameter.

GAUGE PLATE: Gauge plate is a heavy anodized aluminum casting with ribbed face for smooth feeding. Adjustable to cut any thickness of slice up to 5⁄8".

WARRANTY: All parts and service coverage for one year including knife.

WEIGHT: Shipping 83 lbs., Net 63 lbs.

F-39956 – The Edge™ Slicer Page 3 of 4