TROUBLESHOOTING
1812 SLICER
| SYMPTOM | POSSIBLE CAUSE | |
|
|
|
Motor will not start, switch in start | 1. | No power to slicer. |
position. | 2. | Carriage tray unit not in home position. |
| ||
| 3. | Check power cord. |
|
|
|
Power switch in run position, motor will | 1. | Off – On – Start switch malfunction. |
not stay running. |
|
|
|
|
|
Slicer will not shut off. | 2. | Off – On – Start switch malfunction. |
|
|
|
Hard to slice. | 1. | Blade dull. |
| 2. | Carriage bearing assembly not free on slide rods. |
|
|
|
If symptom(s) persists after possible causes have been checked, contact your local Hobart Service Office.
1812 SLicer Technical Maunal Page 17 of 49