USING THE PRESETS: P1, P2, P3, P4
Press any Preset key — the
For example, let's press the [ 1 ] Preset key and assume that the factory settings have not been changed.
In Weight Mode . . .
The preset weight, 0.25 lb, displays for two seconds; then, the actual platter weight (0.00 lb) displays.
NET | lb | P1 | |
slice | P2 | ||
|
88025 | oz | P3 | |
| . | M | P4 |
|
|
NET | lb | P1 | |
slice | P2 | ||
|
88000 | oz | P3 | |
| . | M | P4 |
|
|
To briefly display the preset weight again, press the Recall key, 
.
How to change the preset weight . . .
Enter a new preset weight by using the numeric keys. The P1 indicator blinks until you press the
same Preset key again, to save the 
key once
to clear and reenter a numeric value; or press the 
key twice to restore the previous values.
Set the Tare, if needed.
Set thickness. Slice product. When the platter weight reaches the preset weight, a beep sounds.
Weighing in ounces (or metric units, kilograms or grams) works similarly.
To change the Preset to SLICE mode for counting slices . . .
Let's assume that P1 is still displayed on the screen.
Press the Mode key, 
. Slice is displayed instead of the WEIGHT indicator, lb. Enter the number of slices by using the numeric keys (up to 99). The P1 indicator blinks until you press the
[ 1 ] Preset key again to save the 
key once to clear
and reenter a numeric value; or press the 
key twice to restore the previous values.
NET | lb | P1 | |
slice | P2 | ||
|
88880 | oz | P3 | |
| . | M | P4 |
|
|
NET | lb | P1 | |
slice | P2 | ||
|
88888 | oz | P3 | |
| . | M | P4 |
|
|
Set thickness. Slice product. When the number of slices counts down to zero, a beep sounds.
The display can shift between WEIGHT and SLICE modes by pressing the Mode key, 
, at any time. The displayed weight will reflect the platter weight (less Tare, if NET was displayed).
Repeat or exit. You can exit the Preset by pressing the same Preset key again.
– 10 –
