VENTLESS

FRONT LOADING DISHWASHER

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

COLD WATER: Cold water supplied to condenser coil is heated during the condensing period at the end of each cycle. This pre-heated water is supplied to the booster for subsequent heating.

DRAIN AND OVERFLOW: Large bell type automatic overflow and drain valve controlled from inside of machine. Drain ­automatically closed by lowering chamber. Drain seal is large ­diameter, high tempera- ture “O” ring. Cover for overflow is integral­ part of the standpipe.

STRAINER SYSTEM: Equipped with large, exclusive self-flushing, easily removable perforated stainless steel, one-piece strainer and large capacity scrap basket. Submerged scrap basket minimizes frequent removal and cleaning.

HEATING EQUIPMENT: Standard tank heat is 5 KW electric immersion heating element. Water tempera- ture regulation is controlled by thermistor sensor in combination with microcomputer controls. The tank heat and positive low water protection microcomputer

circuits are automatically activated when the main power switch is turned “on”. If tank is accidentally drained, low water protection device automatically turns heat off. These features are standard with the Hobart Microcomputer Control System.

ENERGY RECOVERY: Heat energy is recovered from the condensation of vapors in the chamber at the end of each cycle. This pre-heats the water for the next rinse cycle from 55°F up to 140°F.

ELECTRIC BOOSTER HEATER: 8.5 KW electric booster with Sense-A-TempTMtechnology adequately sized to raise 110°F inlet water to 180°F.

ACCESSORIES: 193⁄4" x 193⁄4" peg and combination dish racks. Splash shield for corner installations. End of cycle audible alarm (field activated). Delime notifica- tion (field activated). Desirable­ functional accessories can be furnished at added cost. See listed options and accessories on this specification sheet. Write to the factory for special requirements not listed above.

As continued product improvement is a policy of Hobart, specifications are subject to change without notice.

Page 8 of 8

F-40273 –

Ventless Front Loading Dishwasher

F-40273 (REV. 05/11)

 

LITHO IN U.S.A. (H-01)

Page 7 Page 8
Page 8
Image 8
Hobart AM15VLF dimensions REV /11 Litho in U.S.A. H-01
Page 7 Page 8

AM15VLF specifications

The Hobart AM15VLF is a state-of-the-art commercial dishwashing machine that epitomizes efficiency and reliability in the foodservice industry. Designed to meet the rigorous demands of high-volume kitchens, this machine offers a blend of advanced technology and user-friendly features that facilitate superior cleaning performance.

One of the standout features of the AM15VLF is its impressive capacity. It is capable of washing up to 30 racks per hour, making it an ideal choice for busy restaurants and catering operations. The machine is designed to handle a wide variety of dishware, including plates, glasses, and utensils, ensuring that all items are sanitized and ready for service in a minimal amount of time.

The AM15VLF employs a powerful yet energy-efficient wash system. This includes a powerful pump and spray arms that deliver a thorough wash while minimizing water consumption. With its low-flow technology, the dishwasher can operate using less water than traditional models, leading to significant savings on utility costs over time. The energy-saving mode further enhances efficiency, allowing the machine to reduce energy consumption during low-demand periods.

User convenience is a primary focus in the design of the AM15VLF. The machine features a digital control panel that allows operators to select wash cycles with ease. Additionally, the built-in automatic chemical dispensers ensure that the right amount of detergent is used for each cycle, resulting in consistently clean dishes without the risk of overuse or waste.

Durability is another key characteristic of the AM15VLF. Constructed with high-quality stainless steel, the machine is built to withstand the rigors of a commercial kitchen environment. The hygienic design also minimizes the risk of cross-contamination, making it an ideal choice for establishments that prioritize food safety.

The Hobart AM15VLF also incorporates advanced technologies such as a self-diagnostic system. This feature allows for easy troubleshooting, enabling operators to quickly identify and address any issues that may arise during operation, thus minimizing downtime.

In summary, the Hobart AM15VLF is a powerful, efficient, and user-friendly commercial dishwasher that is well-suited for high-demand foodservice operations. With its impressive cleaning capacity, advanced wash system, and durable construction, it serves as a reliable partner for any kitchen, ensuring that dishwashing is efficient and effective.
Top Page Image Contents