Hobart CL54E dimensions Other Available Accessories

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

CL54e

DISHWASHER

AVAILABLE OPTIONS AND ACCESSORIES . . .

Flexibility is synonymous with Hobart CLe dishwash- ers. If your operation demands a dishwasher with a vent hood, an extended hood . . . a power scrapper, just specify the combination of options that suit your needs.

Built-in Pressureless Stainless Steel Booster Heater. Interwired and interplumbed. Saves on installation and saves floor space. Simplifies operation with just one switch to power dishmachine and booster.

Side Loader. Save up to 20 square feet in the dishroom layout with an optional C-Line Side Loader. Racks are indexed 90° into the dishwasher automatically – a feature that cuts space and reduces labor dramatically. Your dishroom team will ­appreciate this feature.

OTHER AVAILABLE ACCESSORIES . . .

Blower-dryer, steam booster heater, and a single- point electrical ­connection to include electric booster heater.

			CL54e
Machine Ratings (Mechanical)
Racks per hour (193⁄4" x 193⁄4")			245
Conveyor Speed - feet per minute			6.8 max.
Dishes per Hour (Average 25 per rack)			6,100
Glasses per Hour (Average 45 per rack)			10,980
Floor Space – Table to Table (Inches)			54
Overall Dimensions – H x W x D (Inches)			681⁄2 x 543⁄4 x 301⁄4
Motor H.P.			2
Conveyor Drive H.P.			1⁄6
Number of Tanks			1
Tank Capacity – Gallons			23
Pump Capacity –
	Gallons per Minute - Weir Test		165
Heating Equipment –
(For keeping power wash hot)
Gas Burners (with Natural Gas)			78,000 BTU per hr.
Electric Heating Unit – Size Used			15 KW
Optional Booster Heater / Final Rinse			15 KW / 30 KW
Rinse – Minutes operated during hour of
	maximum operation		60
Final Rinse Flow – Gals. per min.
At 15 PSI Flow Pressure			1.98
At 20 PSI Flow Pressure			2.30
Final Rinse Flow – Gals. per hr. – MAXIMUM
At 15 PSI Flow Pressure			119
At 20 PSI Flow Pressure			138
			Hot Water Sanitizing -
Rinse 20 PSI Flow Pressure			Chemical Sanitizing
	Gal./Rack		.56 - 180°F – .56 - 120°F
Steam Consumption –
Pounds per hr. - MAXIMUM
Approx. 30 lbs. per hr. = 1 boiler H.P. (BHP)
Dishwasher, based on 20 PSI steam and
on customer supplying final rinse water
	at 180°F maximum		65
Steam Booster, if used on 20 PSI steam -
20 PSI water flowing - 130°F entering
water raised to 180°F min.			60
Exhaust Requirements –
Cubic Feet per minute
		Entrance End	200
		Discharge End	400
Peak Rate of Drain Flow – Gallons per minute.
(Initial rate with full tank)			38
Shipping Weight Crated – Approximate lbs.			613

F-40210 – CL54e Dishwasher Page 3 of 12