– 23 –
MAINTENANCE
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW
LOCKOUT / TAGOUT PROCEDURES.
LUBRICATION
Fig. 11
Slideway
The slideways (Fig. 11) should be lubricated approximately twice a year. To reach these areas, fully lower
the bowl support and remove the apron, which is secured by thumb screws. Wipe a thin coat of Lubriplate
630AA on the bowl pad area of the bowl supports and on each slideway. Install the apron.
Planetary Seal
Occasionally, the planetary seal (Fig. 11) may become dry and begin to squeak. To correct this, work a
little lubrication (mineral oil) under the lip of the seal.