Installation, Operation, and Care of

N50 MIXER

SAVE THESE INSTRUCTIONS

GENERAL

The model N50 mixer is a 5 quart, countertop mixer equipped with 1/6 H.P. motor, #10 attachment hub, and cord and plug as standard equipment.

There are a variety of attachments and accessories available for the N50, and these are explained in a separate Use and Applications Handbook which is supplied with each mixer.

INSTALLATION

UNPACKING

Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found to be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine data plate.

LOCATION

Place the mixer on a suitable sturdy level surface. There should be adequate space around the mixer for the user to operate the controls and install and remove bowls.

MODEL N50 MIXER

ELECTRICAL CONNECTIONS (Cord Connected Mixers)

WARNING: THE ELECTRICAL CORD ON THIS MACHINE IS EQUIPPED WITH A THREE-PRONGED GROUNDING PLUG WHICH MUST BE CONNECTED TO A PROPERLY GROUNDED RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THE PLUG.

– 2 –

Page 2
Image 2
Hobart N50 ML-33777 N50 Mixer General, Installation, Unpacking, Location, Electrical Connections Cord Connected Mixers