Hobart Welding Products 652, 302 Input Connection Label, Electric Shock And Airflow Label, ? a

2-2. Input Connection Label

1		2		3	4
1	2			3	? V
	? V
	? A				5
					3
				4
					S-179 290
5	6	7	8		9

1Warning! Watch Out! There are possible hazards as shown by the symbols.

2Electric shock from wiring can kill.

3Disconnect input plug or power before working on machine.

4Read the Owner’s Manual before working on this machine.

5Consult rating label for input power requirements, and check power available at the job site – they must match.

6Read Owner’s Manual and inside labels for connection points and procedures.

7Move jumper links as shown on inside label to match voltage at job site.

8Having a loop of extra length, connect grounding conductor first.

9Connect line input conductors as shown on inside label – double-check all connections, jumper link positions, and input voltage before applying power.

1/96

2-3. Electric Shock And Airflow Label

1 2 3

S-179 563

1Warning! Watch Out! There are possible hazards as shown by the symbols.

2Electric shock from wiring and exposed weld terminals can kill.

3Close door before turning on unit.

1/96

2-4. Nameplate Safety Symbols

				1	Warning! Watch Out! There
					are possible hazards as
	1	1			shown by the symbols.
				2	Electric shock from welding
					electrode or wiring can kill.
				3	Sparks from arcing electrode
					can cause explosion or fire –
					disconnect cable for process
					not in use.
				4	Read Owner’s Manual for
					connection procedures.
				5	Electric shock from wiring can
					kill.
		5	6	6	Disconnect input power
					before working on unit or
2	3	4
					making terminal strip

connections.

Nameplate D-179 389

OM-222 Page 10