UW50
UTENSIL/PAN WASHER
701 S Ridge Avenue, Troy, OH 45374
SPECIFICATIONS
DESIGN:
loading for large utensils and pans. Three variable wash cycles ensure thorough cleaning and sanitizing.
CONSTRUCTION: Stainless steel tank and hood, frame,
legs and adjustable feet. Front enclosure panel standard.
PUMP: Cast iron pump integral with motor,
impeller, horizontally mounted. Pump capacity 343 gpm.
MOTOR: 5 H.P., available in 208/60/3, 240/60/3, or 480/60/3 configurations. Factory sealed lubrication, drip proof with sealed ball bearings. Thermal overload protection.
RACKS PER HOUR: |
|
Wash Cycle | Racks/Hr. |
2 minute | 19 |
4 minute | 12 |
6 minute | 9 |
WASH CYCLE: Complete automatic operation. Cycle may be interrupted any time by opening door. The selected cycle will restart from the begining when door is closed again.
Upper and lower revolving stainless steel wash arms, with computer designed, debossed,
Large, sloping, perforated, removable stainless steel scrap screens direct food soils to a deep perforated stainless steel scrap basket.
Scrap basket and strainer easily removed.
RINSE CYCLE: 180°F final sanitizing rinse through two upper and two lower revolving stainless steel rinse arms. Rinse arms removable without tools.
WATER USAGE PER RACK:
2.1gallons per rack (booster equipped models)
2.2gallons per rack
RACKING: Standard rack assortment consists of one flat- bottomed frame rack, one flat grid insert rack, and two tray support insert racks. External rack dimensions are 407⁄8" wide, 227⁄8" deep, and 41⁄8" high.
Standard
SPECIFICATIONS: Listed by Underwriters Laboratories Inc., NSF International and CUL.
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
Page 8 of 8 | |
Litho In U.S.A. | |
| UW50 Untensil Washer |