OPERATION

CONTROLS (FIG. 3)

SELECTOR

STARTSWITCH

6

POWER 4

OFF 2

CYCLE

FILL

 

 

PL-56351

 

 

 

 

 

 

Fig. 3

SELECTOR SWITCH

 

 

 

OFF

Electric power to machine is off. POWER and CYCLE lights are off.

FILL

Timed fill requires about 3 minutes. Be sure Drain Lever (Fig. 4) is closed. Press

 

the START button to begin a timed fill.

SELECT WASH CYCLE and press START.

2

A 2-minute wash cycle is followed by a 5-second pause and a 24-second rinse.

4

A 4-minute wash cycle is followed by a 5-second pause and a 24-second rinse.

6

A 6-minute wash cycle is followed by a 5-second pause and a 24-second rinse.

START button

Begins a timed fill or starts a wash cycle.

POWER light (green)

Indicates the machine has power, and the Selector Switch is not off.

CYCLE light (white)

Amber light indicates a timed fill or wash cycle is in process.

NOTE: Opening the door during cycles will cause cycle to start over at the beginning.

DRAIN LEVER (Fig. 4)

Drain lever is located inside the wash chamber (middle front with door open). Lower the lever to close the drain before beginning a timed fill. Rotate lever upward to open the drain after turning the machine off at the end of the day.

DIAL THERMOMETERS (not shown)

Thermometers indicate the WashTankTemperature and the Rinse Temperature. Thermometers are located on top of the wash chamber and are clearly visible when the doors are shut. Minimum WashTank

Temperature is 150°F. Minimum RinseTemperatureFig. 4 is 180°F.

– 11 –

UW50 Untensil Washer 208-240/60/3 Page 22 of 112