21
Classical Spinnaker kit
1
Attach the Spi halyard block
Shackle the spi halyard block through the small bow shackle attached to the thin cord at the top of your FX- One mast. Now pass the halyard through the pulley and thread as per the photograph.
2
Fit the two ratchet blocks and
3
Attach the spinnaker pole to the tang at the middle of the front crossbar.
4
Attach the spinnaker pole bridles and the mid pole support wires to the small hole in the front of the bow tang.
Jib furler bridle
Mid pole support wire
Spi pole bridle
