Holmes HM1230 warranty HOW Cool Mist Works, PRE-OPERATING Instructions, Operating Instructions

Models: HM1230

1 6
Download 6 pages 19.27 Kb
Page 3
Image 3

F E A T U R E S - O P E R A T I O N

HOW COOL MIST WORKS

Your Holmes Cool Mist humidifier draws dry air through the rear air intake grill area. This air is then passed through a moisture–laden wick filter, which retains the minerals and deposits in the water.

The resulting moist air is directed back into the room from the top air grill.

NOTE: This humidification system provides a cool, invisible moisture output. It is normal not to see the mist.

NOTE: A humidity level below 20% can be unhealthy and uncomfort- able. The recommended humidity level is between 40%-50%.

PRE-OPERATING INSTRUCTIONS

1.Be sure the humidifier is switched OFF and disconnected from the electrical outlet.

2.Select a location for your humidifier, on a flat surface, about 4" away from the wall. Do not place your humidifier on furniture or under an overhanging surface; a floor location that will not be damaged by moisture is best.

3.Remove the water tank by holding the tank handle and lifting straight upward (see figure 2).

4.Remove the main housing by lifting straight upward. Check to see that the wick filter is properly in place. Replace the humidifier housing.

FILLING THE WATER TANK

NOTE: This humidifier holds about 1 gallon of water in the tank and humidifier base. The humidifier will produce up to 2.5 gallons of moisture over a 24-Hour period, depending on the room humidity and temperature.

1.Be sure the humidifier is switched OFF and disconnected from the electrical outlet.

2.Remove the tank from the base by holding the handle and lifting straight up (see figure 2).

3.Twist off the tank cap located on the bottom of the tank by turn- ing counter clockwise and fill the water tank with cool, fresh water.

Do not fill with warm water as this may cause leaking.

4.After filling the tank, replace the tank cap by firmly turning clock- wise and then replace the water tank on the base. The tank will immediately begin to empty into the base.

5.Plug the power cord into a 120V AC electrical outlet.

OPERATING INSTRUCTIONS

1.Turn the Power knob to the desired setting, LOW (II) or HIGH (I).

2.When the desired humidity level is reached the power knob can be set to a lower setting to reduce the humidification rate.

NOTE: Allow up to 30 minutes for the filter to fully absorb water and the unit to produce the maximum moisture output.

3.When the water tank is empty and the water in the base is almost empty, you need to refill the tank. The fan will continue to run to help dry the humidifier. Switch off and unplug the unit. Please fol- low the Daily Cleaning instructions before refilling the water tank.

4.Refill the tank as directed in the Pre-Operating Instructions.

If you do not plan to use the humidifier for two or more days, make sure any residual water is drained from the water tank, base and wick filter to prevent algae or bacteria growth.

Figure 1

A. Circular Filter

B

 

Supports

A

B. Circular Extended

 

Life Filter

 

C. Humidifier Base

 

 

C

Figure 2

 

B

F

C

 

A

A. Carry Handle

 

 

 

 

 

 

 

B. Humidifier Tank

 

 

 

 

C. Humidifier

 

 

 

D

Housing

 

 

 

 

 

 

 

D. 2-Speed

 

 

 

 

Humidity Control/

 

 

 

 

Power Knob

 

 

 

 

E. Humidifier Base

 

 

 

 

F. Filter Check

 

 

 

E

Indicator

 

 

 

 

 

 

 

 

Page 3
Image 3
Holmes HM1230 warranty HOW Cool Mist Works, PRE-OPERATING Instructions, Operating Instructions

HM1230 specifications

The Holmes HM1230 is a versatile air purifier designed to enhance indoor air quality in homes and offices. This compact unit is engineered to eliminate a wide range of airborne pollutants, making it a popular choice for those who suffer from allergies, asthma, or other respiratory conditions. With its advanced filtration system and user-friendly features, the HM1230 stands out in the crowded air purification market.

One of the key features of the Holmes HM1230 is its true HEPA filter. This type of filtration captures up to 99.97% of particles as small as 0.3 microns, including dust, pollen, pet dander, and smoke. This efficiency not only improves air quality but also helps reduce the allergens and irritants that can trigger respiratory issues. The unit also includes a carbon pre-filter that helps to eliminate odors from cooking, pets, and tobacco smoke, ensuring that the air smells fresh and clean.

The HM1230 operates quietly, making it ideal for bedrooms, living rooms, and office spaces. It boasts a three-speed fan that allows users to adjust the airflow according to their needs. Whether you require a gentle breeze while sleeping or a higher setting for rapid purification, the HM1230 offers the flexibility to suit various environments.

Incorporating a user-friendly design, the HM1230 features a simple control panel with an easy-to-read indicator that alerts users when it’s time to replace the filter. This maintenance reminder ensures that the unit runs efficiently at all times, providing consistent air purification without the hassle of frequent checks.

The energy-efficient design of the Holmes HM1230 means it can run continuously without significantly impacting your utility bills. Its compact size allows it to fit in smaller spaces, while still delivering powerful performance. The unit is also lightweight, making it easy to move from one room to another.

In conclusion, the Holmes HM1230 air purifier combines advanced HEPA filtration technology with practical features, making it a reliable choice for improving indoor air quality. With its quiet operation, efficient design, and effective filtration capabilities, the HM1230 is well-suited for anyone looking to create a healthier living environment. Whether you’re dealing with allergies or simply want to ensure the air in your home is clean and fresh, the Holmes HM1230 is a solid investment in better air quality.