PLEASE READ AND SAVE THESE IMPORTANT
SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1.Read all instructions before using the appliance.
2.To avoid fire or shock hazard, plug the appliance directly into a 120 V AC electrical outlet.
3.Keep the cord out of heavy traffic areas. DO NOT let the cord hang over the edge of a table or counter. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiator, stoves, or heaters.
4.To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.
5.Close supervision is necessary when any appliance is used by or near children, or by disabled people.
6.Always unplug the fan before moving it, putting on or taking off parts, cleaning, or whenever the fan is not in use. Be sure to pull by the plug and not the cord.
7.Avoid contact with moving parts. DO NOT operate without fan grills properly in place.
8.DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair.
9.DO NOT operate in the presence of explosive and/or flammable fumes.
10.Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by Holmes may cause hazards.
11.DO NOT use outdoors.
12.Always use on a dry, level surface.
13.Keep unit away from heated surfaces and open flames.
14.WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any
15.DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.
THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC (Alternating Current)PLUG (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY.
ASSEMBLY INSTRUCTIONS
Step 1: Remove all contents from the box being careful not to discard the manual and hardware needed for assembly.
Step 2: Pass the power cord through the channel of the stand, and firmly clasp the two halves of the stand together. Insert the base into the bottom of the housing being careful to align the corresponding holes.
Step 3: Gently turn the fan upside down, with the top of the fan touching the floor. Screw the stand into the bottom portion of the fan housing, by using the 2 thumb screws that come with the fan.
Step 4: Place the power cord through the cut out on the bottom of the base. To reduce movement of the power cord during use or transportation, turn the cord clip appoximately 90 degrees to the right until the clip covers the power cord.
Step 5: Place the fan right side up and it is ready for use.
ILLUSTRATIONS |
|
FIGURE 1 | A |
|
FIGURE 2 |
B |
