4.Place the tabs at the bottom of the grill cover into the base of the unit. Gently push the grill cover plate back into place until you hear a click sound indicating that the grill cover is firmly latched. Fig. 4
Connect the power cord into a standard AC outlet.
Fig. 4
NOTE: Unit will not operate unless filters and grill are properly installed.
1. On/Off and Speed Settings
•To turn the air cleaner on, press the ON/OFF 
button on the control panel. When the air cleaner is turned on, the ON/OFF button on the control panel
will illuminate and the air cleaner will start to operate on LOW speed. LOW is the default speed setting when the air cleaner is turned on for the first time. Upon restarting the air cleaner, fan speed will revert to the speed selected prior to turning the unit off.
•Once the air cleaner is on, turn the dial clockwise until the MED setting illuminates to increase the fan speed to MED. Turn clockwise once more to increase the fan speed to HIGH setting. The fan speed dial turns continously in either direction to adjust the fan speed. The dial surround illuminates to indicate the fan speed setting.
•To turn the air cleaner OFF, simply press the ON/OFF 
button on the control panel.
2.Oscillation
To activate the oscillation, press the 
button. To stop oscillation, press the button a second time. Unit will not automatically realign with foot when oscillation is stopped. To achieve alignment, stop oscillation at the moment when the body becomes aligned with the foot.
Cleaning the HEPA Filters
Make sure that the air cleaner is turned OFF and unplugged from the outlet before cleaning.
1.Open the rear grill cover by gently pushing down on the tab on the top of the grill cover. Fig. 5
Fig. 5
2. Open the grill cover outward until the tabs at the bottom of the grill cover easily slide away from the unit. Fig. 6
Fig. 6
3. Remove the HEPA filters from the main unit. Fig. 7 Note: There are two HEPA filters in this air cleaner.
Fig. 7
4.Use the brush attachment with your vacuum cleaner. Run the attachment along both sides of the HEPA filters, cleaning thoroughly between the accordion folds of the filters. Fig. 8
Fig. 8
8 | 9 |
