HoMedics AR-25 On/Off and Speed Settings, Timer, Oscillation, Cleaning the Hepa Filters

4. Place the tabs at the bottom of the grill plate into the base of the unit. Gently push the grill plate back into place until you hear

Replacing HEPA Filters

The life of the HEPA filters is approximately 12-18 months under typical household usage and conditions. We recommend replacing your filters every year. To purchase the HEPA replacement filters,

Fig. 4

a click sound indicating that the grill is firmly latched. Fig. 4

Connect the power cord into a standard AC outlet.

model # AR-OTFL, go back to your retailer (where you purchased your air cleaner), or visit www.homedics.com. After replacing your HEPA filters, be sure to reset the filter indicator by holding the CLEAN FILTER button until it beeps.

NOTE: Unit will not operate unless filters and grill are properly installed.

1. On/Off and Speed Settings

•To turn the air cleaner on, press the ON/OFF button on the control panel. When the air cleaner is on, the LED light in the ON/OFF button on the control panel will be lit and the air cleaner will start to operate on LOW speed.

•Once the air cleaner is ON, press the + button to increase the fan speed to the MED. setting. Press the + again to increase the fan speed to HIGH setting. To decrease the fan speed, press the – button until your desired setting is reached. The fan speed setting is indicated by the LED ring around the fan icon.

•To turn the air cleaner OFF, simply press the ON/OFF button on the control panel.

2. Timer

There are four possible timer settings: 2 (two) hours, 4 (four) hours, 8 (eight) hours, and 12 (twelve) hours. To activate the timer press the + button on the control panel under the TIMER LED screen. Each time the + button is pressed, it will display the successive settings. To return to a setting already passed, press the – button. Once a timer setting has been selected, it will remain displayed on the LED screen. To operate continuously, cycle through all timer settings until no timer setting is displayed.

3. Oscillation

To activate the oscillation, press the button. To stop oscillation, press the button a second time. Unit will not automatically realign with foot when oscillation is stopped. To achieve alignment, stop oscillation at the moment the body becomes aligned with the foot.

Cleaning the HEPA Filters

Make sure that the air cleaner is turned OFF and unplugged from the outlet before cleaning.

1. Open the rear grill by gently pushing down on the tab on the top of the grill plate. Fig. 5

Fig. 5
	2.	Open the plate outward until the
		tabs at the bottom of the grill plate
		easily slide away from the unit. Fig. 5
	3.	Remove the HEPA filters from the
Fig. 6
		main unit. Fig. 6
		Note: There are two HEPA filters in
		this air cleaner
Fig. 7

8 9