MAINTENANCE

RESTORE ORIGINAL

SHAPE BY ROUNDING

THE FRONT

Fig. 67

MAINTAINING THE GUIDE BAR

CAUTION:

Make sure the chain has stopped before you do any work on the saw.

Every week of use, reverse the guide bar on the saw to distribute the wear for maximum bar life. See Figure 68. The bar should be cleaned every day of use and checked for wear and damage.

Feathering or burring of the bar rails is a normal process of bar wear. Such faults should be smoothed with a file as soon as they occur.

A bar with any of the following faults should be replaced:

Wear inside the bar rails that permits the chain to lie over sideways

Bent guide bar Cracked or broken rails Spread rails

In addition, lubricate guide bars with a sprocket at their tip weekly. Using a grease syringe, lubricate weekly in the lubricating hole. See Figure 68.

Turn the guide bar and check that the lubrication holes and chain groove are free from impurities.

LUBRICATING HOLE

Fig. 68

MAINTAINING THE SAFE-T-TIP®NOSE GUARD

CAUTION:

Make sure the chain has stopped before you do any work on the saw.

WARNING:

Although the guide bar comes with a SAFE-T-TIP®anti- kick-back device already installed, be sure to check the tightness of the mounting screw before each use.

Tighten the mounting screw of the nose guard as instructed below. These are specially hardened screws. If you cannot install the screw tightly, replace both the screw and the SAFE-T-TIP®before further operation. Do not replace the screw with an ordinary screw.

In addition to preventing chain contact with solid objects at the nose of the bar, the SAFE-T-TIP®also helps keep the chain away from abrasive surfaces, such as the ground. Keep it on the right-hand side of the bar where it will be between the chain and the ground during flush with ground cutting.

The mounting screw requires a 5/16 in. spanner or adjustable spanner to achieve the recommended tightness of 4-5 Nm (35 to 45 in. lb.). A tightness within this range can be achieved by using the following method. See Figure 69.

1.Tighten the screw with your finger.

2.Tighten the screw an additional three-quarters of a turn using a spanner.

MOUNTING

SCREW

SAFE-T-TIP®

Fig. 69

UK - Page 33

Page 33
Image 33
Homelite CSP4518 - UT74125A manual Maintaining the Guide BAR, Maintaining the SAFE-T-TIPNOSE Guard, Lubricating Hole

CSP3816 - UT74123A, CSP4520 - UT74127A, CSP4518 - UT74125A specifications

Homelite has long been known for producing reliable and efficient outdoor power equipment, and its lineup of chainsaws, including the CSP4518, CSP4520, and CSP3816 models, continues to uphold that reputation. These chainsaws are designed to cater to a wide range of cutting needs, making them popular choices for both homeowners and professionals.

The Homelite CSP4518 - UT74125A boasts a powerful 45cc engine that delivers commendable cutting performance. With an 18-inch bar, this chainsaw is suited for tackling medium to large-sized trees and heavy-duty tasks. What sets it apart is its lightweight design combined with an ergonomic handle, allowing for better control and reduced user fatigue during prolonged use. The CSP4518 also features an automatic oiling system, which ensures that the chain remains well-lubricated during operation, increasing efficiency and extending the life of the chain.

Next in line is the Homelite CSP4520 - UT74127A, which takes cutting capabilities a notch higher with a robust 52cc engine. This chainsaw includes a longer 20-inch bar, making it ideal for felling larger trees and cutting thick logs. With advanced features such as anti-vibration technology, users can experience reduced vibrations, enhancing comfort during operation. The CSP4520 also adopts a tool-less chain tensioning system, allowing quick adjustments to the chain without the need for additional tools, making maintenance hassle-free.

The Homelite CSP3816 - UT74123A is a more compact option, powered by a 38cc engine and featuring a 16-inch bar. This model is perfect for homeowners looking for a lightweight chainsaw that doesn’t compromise on power. The CSP3816 is equipped with a quick-start mechanism, making it easy to start even in cold weather. Moreover, the chainsaw's compact design makes it easy to maneuver in tight spaces, making it an excellent choice for pruning and small-scale cutting tasks.

All three models are built with durability in mind, utilizing high-quality materials and advanced engineering technologies. They come with safety features such as chain brakes and hand guards that provide an extra layer of protection to users. Each Homelite chainsaw also incorporates environmentally-friendly designs that reduce emissions without sacrificing performance.

In summary, the Homelite CSP4518, CSP4520, and CSP3816 models cater to a diverse range of cutting needs with their innovative features and technologies. Whether for professional use or home maintenance, these chainsaws represent reliability, efficiency, and user-friendly design, making them excellent choices for outdoor cutting tasks.