Homelite UT08572A manual Assembling Harness Straps, Adjusting Harness Straps, See Figures 6

ASSEMBLY

ASSEMBLING HARNESS STRAPS

See Figures 6 - 7.

nPlace short looped end of the harness strap through the top bracket. Open loop and slide onto extruded end of the bracket.

nLace long end of the harness strap through the slot in the backpack frame.

nThread the harness strap end through the center of buckle and then through the top toothed portion and tighten.

nRepeat steps to attach the second harness strap to the blower.

CAUTION:

Make all adjustments to the harness straps before starting the blower to avoid the possibility of injury.

ADJUSTING HARNESS STRAPS

Harness straps should be adjusted to a comfortable position before starting the blower.

To adjust the harness straps:

nBlower should be in operating position before adjusting the harness straps. Slip arm through harness strap and onto shoulder, then repeat for the other shoulder.

�n Tighten or loosen each harness strap as needed, until they are adjusted to a comfortable operating position.

�n Pull on harness straps to secure in buckle.

9

SHORT LOOPED	EXTRUDED END
END OF STRAP		OF BRACKET

TOP BRACKET Fig. 6

SLOT IN BACKPACK FRAME

BUCKLE

Fig. 7