ASSEMBLY

assembling the unit for blower operation

See Figure 2.

To assemble the unit for blower operation:

nSlide blower tube onto blower housing until the button on the blower housing clicks into the slot on the tube.

nTo remove, depress the button on the blower housing and remove the tube.

nThe high velocity nozzle on the end of the blower tube can be removed to allow a larger area to be covered during blower operation. To remove, lift the flap and slide the nozzle off. To reinstall, slide nozzle on tube until the tab on the blower tube snaps into the slot on nozzle flap.

assembling the unit for vacuum operation­

See Figures 3 - 4.

To install the vacuum bag:

nSlide the vacuum bag inlet onto blower housing until the button on the blower housing clicks into the slot on the bag outlet.

To install the vacuum tubes:

nSecure the upper and lower vacuum tubes together by aligning the raised tab on the lower tube with the slot on the upper tube. Push the tubes together until the tab snaps securely into the slot.

nUnlock the vacuum door by pushing the door latch away from the door.

WARNING:

Rotating impeller blades can cause severe injury. Always stop the motor, unplug the power cord from the power source, and ensure impeller blades have stopped rotating before opening the vacuum door or installing/changing tubes. Do not put hands or any other object into the vacuum tubes while they are installed on the unit. Failure to follow these instructions can result in serious personal injury.

nOpen the vacuum door and hold open with your left hand.

nInsert the side of the vacuum tube with the ribbed tab into the slot in the catch on the door hinge side (opposite the door latch).

nSecure the other side of the vacuum tube by pushing it into the slot in the door latch and closing the door latch.

nGently let go of the vacuum door until it rests against the vacuum tube.

To remove the vacuum tubes:

nOpen the door latch.

nRemove the ribbed tab from the catch opposite the door latch and remove tube assembly.

nClose vacuum door and secure with door latch.

Page 8 – English

Page 10
Image 10
Homelite UT42120 Assembling the unit for blower operation, Assembling the unit for vacuum operation­, See Figures 3