24
AC Operation
ACCIRCUIT BREAKERGFCIRESET BUTTON
ON
Make sure that the GFCI RESET button is pushed in (flush with its
base plate).
Switch ON the AC circuit breaker.
Plug in the appliance.
Most motorized appliances require more than their rated wattage for
startup.
Do not exceed the current limit specified for any one receptacle. If an
overloaded circuit causes the AC circuit breaker or circuit protector to
switchOFF, reduce the electrical load on the circuit, wait a few minutes,
and then reset the circuitbreaker.
Start the engine (see page ).
Check GFCI operation before each use (see page 18 ).
1.
2.
3.
4.
32
08/02/29 15:19:58 31Z08610_025