Oil Alert System
The Oil Alert system is designed to prevent engine damage caused by an
insufficient amount of oil in the crankcase. Before the oil level in the
crankcase can fall below a safe limit, the Oil Alert system will automatically
shut down the engine (the engine switch will remain in the ON position). If the
Oil Alert system shuts down the engine, the Oil Alert lamp will flash when you
operate the starter, and the engine will not start. If this occurs, add engine oil
(P.19).
OIL ALERT
Voltage Selector Switch (Dual Voltage System)
The voltage selector switches the main power carrying windings of the
generator to produce “12OV ONLY” or “120/24OV”. If a 240V appliance is
connected to the 4-prong receptacle, the switch must be in the “120/24OV”
position. If a 120V appliance ONLY is being connected to any of the 120V
3-prong receptacles, select the “12OV ONLY” position.
120124OV:
The 120V and 120/24OV receptacles can be used
simultaneously.
120V ONLY:
ONLY the 120V receptacles can be used. Do not use
the 120/24OV receptacle in this position. Rated power
will be availabel at the 12OV 30A twist lock receptacle.
VOLTAGE SELECTOR
13