Operation
1. Start the engine and make sure that the pilot lamp comes on.
2. Switch on the circuit breakers.
3. Plug in the appliance.
NOTE: Connect 120V appliances to the 120V receptacles. You can use both
12OV/24OV appliances with the 12OV/24OV receptacle.
CAUTION: Be sure that appliances do not exceed the rated load for more
than 30 minutes, and never exceed the maximum load. Substantial. over-
loading will switch off the circuit breaker. Lesser overloading will not switch
off the circuit breaker and will shorten the service life of the generator.
NOTE: This generator is equipped with an AVR (Automatic Voltage
Regulator).
Though voltage adjustment is not required, fine adjustments may be made by
turning the voltage adjustment knob. Use the generator at the specified
voltage.
AIR dlRCUlT
BREAKERS
13