Honda Power Equipment FL5540K0 Counterweight INSTALLATION/REMOVAL, Installation Instructions

FL5540SUB-FRAME and COUNTERWEIGHT INSTALLATION/REMOVAL

- -

FL5540 SUB-FRAME and

COUNTERWEIGHT

INSTALLATION/REMOVAL

1.Remove the existing frame lower cover and replace with the new lower cover using existing mounting bolts and collar washers.

d--1Never operate the tractor without the lower cover.

INSTALLATION INSTRUCTIONS

1 C(M#ECO)IUCISWFACESBEIWEENBUWMrPrJllL

i MOW ME BRAcILl DY INSWING WE Q) WLR RMCBlTOpouOl W I T . . 3. W H E N UNDBnDE MOUmNC KHTr 29 ft-& 0 9 h

1.IIcHlEN SIDE LHWW IOU& 29 8-09Hn TopouD.

m

ME pAmI FRAME CAN BE DAMACED F ME lpAcrop

ISMOVEDWHLEMHL1COMRISOCFORWIJSAB3

NOT lWITWE0 Io ME mofm TopOK

NEW LOWER FRONT COVER

Note: A second label is included with this operator's manual. Install this label onto the original frame lower cover.

2.Remove the drawbar and replace it with the bottom bracket using the two

12 x 25mm hex hd capscrews with 7/16" washers and two 10 x 30mm hex hd capscrews with 3%" washers.

Torque front cover and rear bracket bolts as follows:

10mm Bolts 29 ft-lbs.(29Nm). 12mm Bolts 43 ft-lbs.(60 Nm).

/ . .-. .. .

DRAWBARBOLTS

BOirOM. . BRACKET

13