Spark Arrester Maintenance (Optional Part)
rmm If the mower has been running, the muffler will be very hot.
Allow it to cool before proceeding.
1. Remove the two 4 mm screws and tail pipe, and then remove the spark
arrester and the arrester number plate from the muffler.
2; Use a brush to remove carbon deposits from the spark arrester screen.
CAUTION: Be careful not to damage. the spark arrester acreen.
NOTE: The spark arreste; must be free of breaks and holes. Replace, if
necessary.
3. Install the arrester number plate, spark arrester and tail pipe on the muf-
fler, and tighten two 4 mm screws securely.
4 mm SCREWS
SPARK ARREST