MAINTENANCE & ADJUSTMENTS
Control Cable Adjustments. Blade Control Cable Adjustment
Measure free play at the top of the lever, while holding the button
down. Free play should be 20 - 25 mm (3/4 - 1 in). If adjustment
is necessary:
1. Loosen the locknuts with a 10 mm wrench, and move the
adjuster up or down as required.
2. Tighten the locknuts and recheck free play.
3. Start the engine outdoors, and operate the blade control lever.
Check that the blade starts when you pull back the lever and
stops quickly when you release the lever.
If the blade does not start or stop as it should, with correct
cable adjustment, repair may be needed. Take the mower to
an authorized Honda lawn mower dealer.
20-25mm
BLADE CONTROL LEVER