7
Drive Clutch Lever
(SDA, TDA)
Push the drive clutch lever
forward and hold it against
the handlebar to propel
the mower forward.
Release the drive clutch
lever to stop the mower’s
forward movement.
Always release the drive
clutch lever before starting
the engine. If the drive
clutch is engaged, the mower will move forward when you operate the
starter.
Operate the drive clutch lever with a quick and complete motion, so
the drive clutch is either fully engaged or fully released. Hold the drive
clutch lever against the handlebar during self-propelled mowing. This
will help to extend the service life of the clutch mechanism.
Shift Lever
(TDA)
Use the shift lever to adjust
the forward speed of the
mower. Do not use the
throttle lever; the throttle
lever must be kept in the
FAST position for the best
mowing performance.
You may move the shift
lever anytime; however, if
the mower is pulling hard,
release the drive clutch
lever between shifts for
smooth operation.
1st and 2nd gears are recommended for maximum mowing
performance. 3rd gear should be used to transport the mower.
STOPPING THE ENGINE 1. Move the throttle lever
to the SLOW position.
2. Release the drive clutch
lever (SDA, TDA).
3. Release the flywheel
brake lever.
4. When the mower is not
in use, turn the fuel
valve to OFF.
DRIVE CLUTCH LEVER (SDA, TDA)
SPEED
3
2
1
1st
GEAR 2nd
GEAR
3rd
GEAR
SLOW
DRIVE CLUTCH
LEVER (SDA, TDA)
FLYWHEEL
BRAKE
LEVER
OFF
FUEL
VALVE