The purpose of inspection and maintenance is to keep the snowblower in the best operating condition. Inspect or service as scheduled in the table below. l Shut off the engine before performing inspection and maintenance, and
disconnect the spark plug wire from the plug so the engine cannot be
started.
l If the engine must be run, make sure the area is well ventilated. Exhaust
gas contains poisonous carbon monoxide; exposure may cause loss of
consciousness and may lead to death.
CAUTION:
l To avoid overturning, place the snowblower on a level surface before
parforming inspection and maintenance.
l Use only genuine HONDA parts or their equivalent.
Replacement parts which are not of equivalent quality may damage the
snowblower.
MAINTENANCE SCHEDULE
NOTE: (1) These parts may require more frequent inspection and replacement under heavy use.
(2) These items should be serviced by an authorized Honda dealer, unless the owner has the proper tools
and is mechanically proficient. See the Honda Shop Manual for service information.
24