23
OPERATION
HS1132:
Electric-startModels (TAS, WAS type):
CHOKEKNOB
CLOSED FAST
THROTTLELEVER
POWERCORD
Pull the choke knob to the CLOSED position and move the throttle
lever to the FAST position.
Start the engine.
Connect your power cordto the s witch box and the maleend of
the power cord to a properlygrounded 120 Volt ac outlet.
To minimize the possibility of potentially dangerous electrical shocks,
always use a 3-conductor power cord with a power ratingof no less
than 15 amps. Also, be surethat the outlet you are using is properly
grounded.
Do not connect and disconnect the power cord with wet hands.
Be sure to hold the plug when disconnecting the power cordf romthe
electrical outlet or switch box. Do not disconnectby pulling on the
power cord.
5.
a.
06/11/16 10:15:51 31767721_024