3. PRE-OPERATION CHECK 1. Suction hose (commercially available)
Use a reinforced-wall or wire braided hose to prevent suction collapse.
Since the pump’s self-priming time is directly proportional to hose length,
a short hose is recommended.
Secure the hose with the hose band.
1 IMPORTANT NoT’CE 1 Always install the strainer on the end of the suction
hose before pumping. Graiel or debris sucked into the pump will cause
serious impeller damage. STRAINER
2. Discharge hose (commercially available) 2. Discharge hose (commercially available)
(optional parts)
When using a fabric hose, always use a hose band to prevent the hose
from disconnecting under high pressure.
NOTE: A short, large-diameter hose will provide lower fluid friction and
improve efficiency.
HOSE‘BAND
(optional parts1
6