Honda Power Equipment WB20X, WB30X

OPERATION

SETTING ENGINE SPEED

OPEN

CHOKE LEVER

FAST

SLOW

THROTTLE LEVER

If the choke lever was moved to the CLOSED position to start the

engine, gradually move it to the OPEN position as the engine warms

up.

After starting the engine, move the throttle lever to the FAST position

for self-priming, and check pump output.

Pump output is controlled by adjusting engine speed. Moving the

throttle lever in the FAST direction will increase pump output, and

moving the throttle lever in the SLOW direction will decrease pump

output.

07/04/28 15:54:59 31YG3600_023

Contents

Main Page INTRODUCTION 2 INTRODUCTION PUMP SAFETY IMPORTANT SAFETY INFORMATION CONTENTS 4 CONTENTS PUMP SAFETY Page Page COMPONENT & CONTROL LOCATIONS WB20X CONTROLS WB30X Page Page Page BEFORE OPERATION 14 BEFORE OPERATION 15 BEFORE OPERATION OPERATION IMPORTANT SAFETY INFORMATION BEFORE OPERATION Page Page Page Page Page Page Page Page SERVICING YOUR PUMP Page MAINTENANCE SCHEDULE For commercial use, log hours of operation to determine proper maintenance intervals. Service more frequently when used in dusty areas. (2) Failure to follow this maintenance schedule could result in non-warrantable failures. Page Page Page Running the engine with a low oil level can cause engine damage. Page Page Page Incorrect spark plugs can cause engine damage. Page Page STORAGE Distributors Limited Warranty Page Draining the Fuel Tank and Carburetor Page BEFORE OPERATION Page ENGINE TAKING CARE OF UNEXPECTED PROBLEMS 46 TAKING CARE OF UNEXPECTED PROBLEMS PUMP TECHNICAL & CONSUMER INFORMATION Page Page The U.S. and California Clean Air Acts Tampering and Altering Source of Emissions Problems That May Affect Emissions Replacement Parts Maintenance Emission Control System Warranty Specifications Dimensions and weight Engine design and performance Tune up WB20X Pump WB20X (continued) Dimensions and weight Engine design and performance Tune up WB30X Pump WB30X (continued)