
Checking Batteries
On the digital keypad, press the “B” button.
•If the red LED light flashes, change the batteries within 2 months.
•If no LED lights, change the batteries immediately.
Changing Batteries
Changing batteries will not erase your personal code.
1.Open the safe door using your personal code and locate the battery compartment on the lower inside portion of the door.
2.Push in on the left side of the cover and remove by sliding to the right (Fig. 6)
3.Carefully replace the batteries (4
4.Replace the cover by sliding back into position.
English
Appropriate Use of
Your Safe
•Your
•For information on safes that provide protection from fire and water damage, see your Home Security retailer or visit our website at www.honeywellsafes.com
Troubleshooting
•Safe will not open with your personal code:
Open the safe using the override key and
•No LED Lights:
Remove the override lock cover and open safe with the override key. Refer to checking/changing batteries.
If you continue to experience problems or have questions regarding your safe, please contact Sisco customer service at
Thank you!
4