Honeywell 3820, 3820i, 4820, 4820i Open Link, Override Locked Imager, Unlinking the Imager

Open Link

Scan the Open Link bar code, then place the imager into the base to establish a link. Placing a different imager into the base establishes a new link and the old imager is unlinked.

Open Link

Override Locked Imager

If you need to replace a broken or lost imager that is linked to a base, scan the Override Locked Imager bar code with a new imager, and place that imager in the base. The locked link will be overridden; the broken or lost imager’s link with the base will be removed, and the new imager will be linked.

Override Locked Imager

Unlinking the Imager

If the base has an imager linked to it, that imager must be unlinked before a new imager can be linked. Once the previous imager is unlinked, it will no longer communicate with the base. Scan the Unlink Imager bar code to unlink an imager.

Unlink Imager