Reading Techniques
The view finder | Center |
projects an aiming | beam over |
beam that should | barcode |
be centered over |
|
the barcode. (The |
|
4820/4820i can be | 4820/4820i |
positioned in any | can read in |
direction for a | any direction |
| |
good read.) |
|
Hold the imager over the barcode, pull the trigger, and center the aiming beam on the barcode.
The aiming beam is smaller when the imager is closer to the code and larger when it is farther from the code. Hold the imager close to smaller barcodes, and farther away from large barcodes to get a proper read.
If the barcode is highly reflective (e.g., laminated), you may need to tilt the imager at an angle so the barcode can be scanned.
Note: If the imager beeps 3 times when scanning a barcode, the link has not been established. If the imager beeps once, the link has been established.
3
