Honeywell manual Adjusting the Set-Back Temperature of the 4500 Thermostat

Adjusting the Set-Back Temperature of the 4500 Thermostat

Keep in mind that the on-premises existing thermostat is set to the desired temperature for when the building is occupied. The 4500 thermostat is used to set the set-backtemperature for when the premises is unoccupied and the security system is in the ARMED AWAY mode.

The 4500 thermostat is set from any Touch-tone phone, either on- premises, or by calling in when away.

1.Make sure that the front panel switches on the 4500 thermostat are set correctly.

•The ACTIVE/BYPASS switch must be set to ACTIVE, and

•The HEAT/COOL switch must be set for the desired mode of operation.

2.Enter thermostat mode as described on page 5. A menu of user commands will be announced.

3.When you hear the prompt, “To change temperature, enter 1,”

Press 1 during a pause in the thermostat mode menu announcement.

The system will announce “Temperature set to 65,” for example.

4.Next, it will announce “Enter new temperature.”

If you want to keep the present set-back temperature, 65 degrees in this example, just press ✴ .

5.If you want to change the set-backtemperature point, you can then enter a new temperature:

6

1

for example.

You have now set your unoccupied premises temperature to 61 degrees. The system will then announce the change of set point.

6