Honeywell 5103 manual Entering The Wrong Code, Secure Lockout Period, Override Access Key

Models: 5103

1 4
Download 4 pages 745 b
Page 3
Image 3
ENTERING THE WRONG CODE

ENTERING THE WRONG CODE

If you press a wrong key while entering your code, you may press “clear” to reset prior to pressing, “lock”. If you have entered the wrong code followed by “lock”, the LED panel will display “ERROR

SECURE LOCKOUT PERIOD

If a wrong code is entered 3 times in a row, the digital keypad will begin a five-minute lockout period. During this period the LED will display “HOLD05” and the keypad will become disabled. Once the lockout period has expired, the safe can be unlocked using the active code.

You may use the override key to open safe, but keypad complete the full lockout period.

OVERRIDE ACCESS KEY

If the active code is unavailable or your keypad fails due to dead batteries, etc., you may open the safe using the Override access key.

REPLACING BATTERIES

You may check the battery power at any time by pressing the “lock” key just once. The LED display will show one of the following messages:

Battery power is good

Battery power is low and batteries should be replaced

To replace the batteries please follow the instructions in STEP 2. in the SETUP section. It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries.

NOTE: The active code will not be erased if the batteries become weak or are removed.

IF YOU FORGET PASSCODE

1.Insert Override key and turn to right (open position).

2.With the key in the open position press “clear” on your keypad.

3.Turn the key to left (lock) position and remove it from lock.

4.The safe may be opened by pressing any 3-6 digit code followed by “lock”.

5.You may now enter any new 3-6 digit code and return to normal operation.

SAFE SERIAL NUMBER

Whenever contacting our Consumer Assistance Department, you will need to provide the them with the serial number of your safe. The serial number tag is located on the lower right corner on the front of the safe.

IMPORTANT: Do Not Remove Tags! This is needed if your safe fails or you lose your keys.

ORDERING NEW KEYS

If a key is lost or you would like additional keys, contact our Consumer Assistance Department.

You will need to provide the following information:

• Safe Serial Number

 

• Number of keys requested

 

• Name / Address / Telephone

 

E-mail address if available

To order by Mail, send above information with a

Consumer Assistance Dept.

check or money order for $12.00 (U.S. funds) to:

LH Licensed Products, Inc.,

 

860 East Sandhill Avenue,

 

Carson, CA 90746 USA

To order keys by telephone, call us toll-free at:

1-877-354-5457

 

(USA & Canada)

 

Monday–Friday

 

7am - 5pm PST

We do accept Visa and MasterCard payments for orders received by telephone.

Express Delivery available for additional charge. Subject to change without prior notification.

CONSUMER ASSISTANCE

Contact us by mail at the following address:

Consumer Assistance Dept.

 

LH Licensed Products, Inc.,

 

860 East Sandhill Avenue,

 

Carson, CA 90746 USA

Contact us by telephone (toll-free) at:

1-877-354-5457

 

(USA & Canada)

 

Monday–Friday

 

7am - 5pm PST

Page 3
Image 3
Honeywell 5103 Entering The Wrong Code, Secure Lockout Period, Override Access Key, Replacing Batteries, Ordering New Keys