Honeywell 51130 Series manual Replacement Filters, Operation, General Description Of Features

Features

GENERAL DESCRIPTION OF FEATURES B

D

A.Speed Control/Power Switch

B. Ionizer Control	G	A
C. Filter-Change Calendars		C
D. Ionizer Indicator Light	E

E.Power Indicator Light

F. Air Intake F

G.Air Outlet

H.Base

I.Locking Handle

IH

The Ionizer charges particles in the air which may enhance the air cleaner’s performance.

Replacement Filters

	HEPA Filter	Carbon Pre-filter
Model No.	Part Number	Part Number
51130	Duracraft HEP-5020	Honeywell 38002

Replacement filters may be purchased from the retail store or ordered from the dealer where you purchased the product. If you cannot locate one, please call our Consumer Relations Dept. at (800) 332-1110 or e-mail us at: service@honeywell.com.

Operation

Step 1: Inspect Air Cleaner upon removal from its container. Remove and discard any packaging material.

Step 2: Place the air cleaner on a flat, level, unobstructed surface. IF USING THE

IONIZER, DO NOT PLACE THE AIR CLEANER WITHIN THREE FEET OF ANY COMPUTER OR MAGNETICALLY SENSITIVE DEVICES SUCH AS FLOPPY DISKS OR TAPES.

Step 3: Make sure that speed control is set to the OFF position. Plug in air cleaner.

Step 4: Set speed control to the “super” position. Allow the unit to operate for a few minutes at “super”, then leave the control knobs in the “super” position for faster, more powerful room cleaning, or move the knob to a lower setting for quieter operation. Set Ionizer control to desired setting, O (Ionizer OFF) or I (Ionizer ON).