Field/Option Description

Saves the bar code displayed in the preview area as a graphic file as a .png or .tiff.

SaveBy default, the name of the graphic file is the same as the name of the open EXM file. You can enter a different name when saving.

Saves all bar codes in the package as individual graphic files.

Save AllBy default, the graphic files are saved with the same name as the open EXM file with a number at the end to distinguish the individual graphic files from each other.

Print

Opens the printing window where you can select print options and print the bar code package. For details, see Printing and Saving Options on page 4-18.

Advanced Tab

The Options tab contains settings that tell EZConfig Client how to process the EXM file on the terminal.

Field

Description

 

 

 

Bar Code Options – This section determines some of the basic bar code parameters.

 

 

Max Barcode Size

Set the maximum amount of data (in bytes) one bar code can contain. The lower the

 

number of bytes, the smaller the bar code.

 

On the Bar Codes tab, bar code size appears in the Display field (see page 4-15).

 

The total number of bar codes created as a result of the maximum bar code size limit

 

appears at the bottom of the Advanced window; see Bar Codes (page 4-18).

 

 

Always use

This option is selected by default. It calibrates the data so that the minimum number of bar

minimum # bar

codes are used. When this option is selected, the number of bar codes slider on the Bar

codes

Codes tab is disabled.

 

 

Use custom

This option enables you to password-protect the bar code you’re creating.

password

Select this option, then enter the password in the field provided. You will be able to see the

 

password when you enter it; however, you will not be able to see the password again once

 

you close the window because the password will be encrypted.

 

If you password-protect the bar code, EZConfig Client on the terminal will prompt you to

 

enter that same password on decoding.

 

 

4 - 16