User Configurable Prefix/Suffix

One or two prefix or suffix characters can be added and assigned for data transmission. Use one of the codes below with a 3 code byte sequence that represents the desired character (see ASCII Conversion Chart, end of document) for your prefix or suffix. (To add additional prefix/suffix characters, refer to your Single-Line Configuration Guide.)

Scan the Enter/Exit Programming bar code to begin. Then scan the 3 digit decimal equivalent of the ASCII character into the appropriate character location with the code byte bar codes (see Code Bytes, end of document). To save, scan the Enter/Exit Programming bar code again.

Example: To add an asterisk (*) as a prefix, scan the bar codes:

1.Enter/Exit Programming

2.Configurable Prefix #1

3.Code Byte 0

4.Code Byte 4

5.Code Byte 2

6.Enter/Exit Programming

³9 9 9 9 9 9

Enter/Exit Programming

³ 9 0 3 5 0 0

Configurable Prefix #1

³9 0 3 6 0 0

Configurable Prefix #2

³ 9 0 4 5 0 0

Configurable Suffix #1

³ 9 0 4 6 0 0

Configurable Suffix #2