15 69-1081—3
qPress to accept the change.
qRepeat these steps for each day you want to copy.
NOTE: donE appears for two seconds and then the normal program display appears.

Clear a Program Period

NOTE: Wake cannot be cleared.
qPress , , or for the program period you want to clear.
qPress until the desired day displays.
qPress and hold the , , or for approximately 3 seconds until the time and temperature clear.
qRepeat the above steps for each period to be cleared.
qPress .
STEP 9. OPERATING YOUR THERMOSTAT

Change Temperature Setting Until the Next Program Period (Temporary Change)

qPress or until the screen shows the desired temperature setting.
NOTE: The temporary temperature setting is displayed for about 3 seconds and then the room temperature is dis-
played. Temporary appears in the display. The setting cancels when the next program period starts or when
you press .
M1332
9
Copy
Leave Return Sleep
Day
Leave Return Sleep
Run
Program
Run
Program
69-1081.fm Page 15 Wednesday, May 18, 2005 9:03 AM