69-1081—3 14
NOTE: Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30.
qPress or until the desired wake temperature displays.
The setpoint temperature range is 40°F to 90°F (7°C to 31°C) for heating and 45°F to 99°F (9°C to 37°C) for cooling.
qPress to switch between setpoints.
NOTE: Program times are the same for heating and cooling.
qPress or until the display shows the desired temperature setpoint.
qPress , or and repeat these steps for each program period. The first day is now programmed.
qRepeat each step in Program the First Day for the rest of the week.
NOTE: After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day.
qPress when the entire week is programmed.
Copy a Day
Your thermostat can copy program settings from one day to another.
qPress , , or to enter programming mode.
qPress until the display shows the day you want to copy.
qPress . The display shows.
qPress until the display shows the day you want to copy to.
Heat/Cool
Settings
Leave Return Sleep
Run
Program
Wake Leave Return
Sleep
Day
M13327
Mon
Copy
M13328
Mon Wed
Day
69-1081.fm Page 14 Wednesday, May 18, 2005 9:03 AM