11 69-0816
program will remain for only about 20 seconds in
the event of power loss.
When batteries are first installed, the display
will flash 1:00 PM and 32°. When the batteries are
low, the display will flash REPL BAT. You have 20-
30 seconds to replace batteries after removing them
from the thermostat. After 20-30 seconds, you will
have to reprogram. REPL BAT indication will disap-
pear when the thermostat is mounted back onto the
powered subbase.
If batteries are completely dead, the display
will go blank when the thermostat is removed from
the subbase. After replacing the battery in this
case, reprogramming is necessary.
MOUNT THE THERMOSTAT
With system switch set to OFF, hang the ther-
mostat on the tabs at the top of the subbase
(Fig. 8A). Swing down and press on lower edge
until thermostat snaps in place (Fig. 8B). Open
cover and tighten the captive mounting screws
(Fig. 8C).
Fig. 8—Mounting the thermostat on subbase.
M9074
PM
MORNIMG
MON HEAT ON
ROOM
AUTO
PM
MORNIMG
MON HEAT ON
ROOM
SYSTEMENRG. SAVE
RUN
PROGRAM
TIME
PERIOD
TEMPERATURE
PRESENT
SETTING
SKIP
NEXT
PERIOD
CHANGE
TO LAST
PERIOD
SET
PRESENT
DAY/TIME
HOLD
TEMP
DAY
SET
HEAT/COOLSLEEP
LEAVEAHEADWARMER
RETURNBACKCOOLER
WAKE
A. B.
C.
EM. HEAT AUX. HEAT
EM. HT HEAT OFF COOL
ONAUTO
FAN
SYSTEMENRG. SAVE