Installing the Enclosure Cover

To install the enclosure cover, use the Allen key (supplied) to secure the HD4D dome enclosure to the base with four #8-32 security screws.

Figure 7 Enclosure Cover Installation

HD4D dome enclosure

#8-32 security screws (x4)

Routine Maintenance

Use regular liquid cleaners to remove dirt and grime from the HD4VC4HR dome.

Caution Do not use harsh or abrasive cleaners which can scratch the polycarbonate dome and reduce visibility for the camera.

If the camera view is obstructed by scratches, remove the front plate and rotate to find an unscratched part of the dome.

Document 800-00023 Rev D

21

05/07