Honeywell Industrial Wireless | High Gain |
Warning: Always use caution when installing this antenna. You can be seriously injured if this antenna comes near or in contact with a power line. Follow all local and national electrical code requirements when installing the Base Radio with the high gain antenna.
[1]Select the locations for the high gain antenna and Base Radio. The location for the high gain antenna should be selected based on optimal positioning for RF communications with the field units.
Any Base Radio with an Omni Directional antenna is for ordinary locations only.
[2]Position the antenna so that the gold sleeve clears any obstructions.
[3]Mount the antenna using the 2 mounting brackets. One clamp must be placed at the center of the gold sleeve, the other at any point below.
[4]Connect the Base Radio coaxial cable to the antenna and hand tighten.
[5]Wrap the connection with the supplied waterproofing material.
Note: Do not cover the drain holes on the bottom of the antenna as they provide drainage for moisture.
[6]Finished.
Rev. 4 0806 | User Manual | 8 |
