Ejecting the Ring Scanner
1.To eject the ring scanner, open the connector ring with one hand, pulling toward the outside of the sled.
2.Push the ring scanner connector out of the sled.
1
2
Mounting the Arm Band
Note: The illustrations in this procedure assume the sled has not yet been mounted to the arm band. However the sled can be mounted to the arm band before the user puts the arm band on.
1.If the arm band straps are not fed through the buckles, feed them through to form a loop before placing the arm band on the arm. For ease of instal- lation, the straps should be kept looped through the buckles.
2.Place and balance the arm band assembly on the top of the desired arm with the buckles toward the outside of the arm.
3. Using the other hand, pull each strap end straight away from the arm until the arm band is comfortably secured.