Setting up the HX3

Please have the following Information available before setting up your HX3:

•Network ID (SSID) of the Access Point

•WEP key or LEAP authentication credentials

1.Connect a fully charged battery to the HX3.

2.Press the Power button.

3.Connect via ActiveSync

4.Copy LXEConnect files to PC.

5.Install and launch LXEConnect

6.Accept the EULA.

7.Set the date and time.

8.Edit the radio parameters.

9.Perform a reboot.

Bluetooth and HX3

Please refer to the HX3 Reference Guide for information when using the HX3 with Bluetooth.

ActiveSync

Installing ActiveSync on Desktop/Laptop

ActiveSync (version 4.5 or higher for Windows XP desktop/laptop computers) must be resident on the host (desktop/laptop) computer. Windows Mobile Device Center is required for a Windows Vista/Windows 7 desktop/laptop computer. ActiveSync and Windows Mobile Device Center for the PC are available from the Microsoft website. Follow Microsoft's instructions to locate, download and install ActiveSync or Windows Mobile Device Center on your desktop/laptop.

ActiveSync using USB-Client Connection

The only connection type is USB Client.

1.Connect the HX3 end of the cable to the connector on the bottom of the HX3.

2.Connect the USB type A connector on the I/O cable to a USB port on a PC or laptop.

ActiveSync starts automatically when the USB cable is connected.

When the HX3 loses connection, the connection to ActiveSync is lost. Disconnect the PC end of the cable and re-connect.

Please refer to the HX3 Reference Guide for ActiveSync information.